Electrical distribution boards are an essential part of any building; residential or commercial. These systems aid in the smooth flow of electricity throughout the infrastructure. The distribution board is responsible for supplying varying voltages to different consumption points in the building.

The Generic Configuration of an Electrical Distribution Board

The basic configuration of most distribution boards is similar. Just like all boards, the Siemens distribution board consists of various gadgets. This is because the distribution board is an overall system in itself. It consists of neutral links, interconnected wires, and earth leakage units.

The main component of the electrical distribution boards is the circuit breaker. This circuit breaker is specially equipped to distribute the total amount of electricity amongst the other miniature circuit breakers (MCB). These electric units are passed from the miniature circuit breakers to the individual power outlets through wires and cables. Often these cables are also attached to the electrical distribution board but are placed opposite the feeder electric cable.

Other Essential Components of Electrical Distribution Boards

Along with these components, there are other pertinent components in an Electrical Distribution Board. These include fuse links, residual current detector (RSD), switches, bus bar, and bypass equipment. Each of these components plays a vital role in providing safety to a building from electrical accidents. For example, the residual current detector (RSD) prevents the infrastructure from issues such as ground fault shock and fire due to a short circuit. The bypass equipment, on the other hand, prevents the board from issues such as power overloading, etc.

Electrical Distribution Boards can be Personalized

You may have often heard that all commercial buildings require the same kind of Legrand distribution board. However, that is not at all true! All electrical distribution boards are customizable. Each electrical distribution board is prepared according to the needs and requirements of the infrastructure. This is why they vary from one building to another.

Despite varying from building to building, the components are the same for each board. This means that each board consists of fuse-links, switches, etc. However, the number of these components varies.

Delivering the Correct Amount of Voltage and Ensuring Building Safely

The importance of the electrical distribution board is such that it constantly needs to be checked and old devices needed to be replaced with new ones. But this can be a tricky job. Before doing so, it is important to get these devices tested and approved by a professional electrician. Moreover, it is strictly not advisable for any person to handle these devices without prior experience or assistance.

Due to the high distribution board price, most people do not consider setting it up in their residential or commercial buildings. However, to attain maximum performance, efficiency, and safety is it immensely important to set up a reliable electrical distribution board in your commercial building. Nevertheless, you will need to ensure that you use all switches and circuit breakers that are compatible with the main system.

• Single Door Distribution Board: A single door distribution system is available in 4-way, 8-way, and 16-way variations for simple applications.
• Double Door Distribution Board: A double door distribution panel is used for more heavy-duty activities and an expanded number of devices and connections. They are primarily used for business purposes.

Buy a Perfect Distribution Boards

These three main characteristics must be present in today’s distribution boards:

Safety: The fuse is an essential component of any distribution board. A fuse is a vital part of a distribution board because it stops overcurrent from flowing through the circuits. The fuse automatically disconnects down the central supply in the event of an excessive current, protecting your equipment and your home or office from any electrical hazard.

Aesthetics: Distribution boards are more than just electrical components; they also give the space a stylish appearance. These boards no longer distract from the overall appearance of offices. Consider the quality and design, as well as the safety features, when purchasing these boards.

User-Friendly: It is not the best choice if a distribution panel is not user-friendly. Wires should be able to travel about quickly on the board. It must be simple to set up and manage. Your electrical distribution system’s longevity and protection are ensured by properly designed and user-friendly distribution boards.

Safety Tips for Distribution Board

A power distribution board is an electronic device that is highly significant. As a result, they must be maintained to prevent a potential hazard. Some suggestions are given below to assist you in keeping these boards.

• The unused position on a distribution board should be covered with a blanking plate.
• These boards should not be used in any environment. Ascertain that it does not encounter water.
• Place these boards away from any set cooking appliances.
• Corrosion protection should be given to distribution boards.
• They should be put following the conditions in which they work.
• The number of links on distribution boards must not surpass the necessary number.
• To avoid hazards, place a safety warning near these boards if necessary.

Buying Distribution System Online

Ampkart online store has all the safety and style features mentioned above, making them a favourite amongst electrical professionals. Ampkart constantly works by the standard electrical configurations and modern designs. They are available in 4, 6, 8, and 12-way; they are supplied with a wire set fitted with an earth bar, neutral bar, and wire ties.

A distribution board is nothing but a simple component of an electricity supply system that divides an electrical power connection into various subsidiary circuits, all the while providing a protective fuse or circuit breaker for each of the circuits in a common enclosure. The main electrical supply cable which comes from the power company is put into the distribution board and then with the help of breakers, they get evenly distributed into secondary circuits(electrical appliances). Therefore if we want to maintain a proper electricity distribution system for our appliances then it’s a must-buy, Distribution Boards.

Why Need Distribution Boards?

You see when electricity supply reaches our homes, it comes in a range of dynamic frequencies and can damage our residential or commercial properties with its uneven distribution pattern. This is the primary reason why it’s advisable to install a distribution board in our homes or commercial establishments so that our electrical systems and appliances can work as they are supposed to without any kind of electrical damage.

If you’re thinking that buying a distribution board for just proper distribution of electricity supply isn’t enough good a reason to justify the high cost which will have to be incurred for buying this then let me inform you about its other fundamental attributes. Distribution boards are not just a closed enclosure board, for it’s a complete package. The system itself has an A grade phase bush bar, neutral links, an earth leakage unit, and also interconnecting wires all dedicated to the safe and minimal lossless distribution of electricity for our electrical systems and appliances. So while it may seem expensive initially but it will safeguard our homes or commercial establishments for years to come.

Since distribution boards are often exposed to the air, rust may likely form over time. Rust is nothing but the oxidation of iron molecules with air as a catalyst. Although now every distribution board comes with phosphate coatings to ensure that rust does not form, still several local company distribution boards use normal steel to manufacture distribution boards. I would recommend buying only genuine branded distribution boards(easily available online) to have a good experience, free from any kind of worries throughout its lifetime.

SAFETY-wise distribution boards have a critical component mainly responsible for the safe distribution of electricity. It’s  Fuse. Now the power company makes the power somewhere else and then transmits the same with the help of high tension transmission cables. While in theory one hundred percent of electricity produced should reach the consumers, but this doesn’t always happen. What happens is the electricity supply happens in a random frequency, it’s low voltage sometimes high. There is a limit to high much high the voltage can our electrical appliances and systems endure and if it crosses the threshold limit then the appliance may burn out or get damaged beyond repair. So this is why distribution boards also have an in-built fuse which itself breaks whenever there is an overload of electricity supply.

The STYLISH quotient is another important but not critical factor when you’re buying a distribution board. Mainly used for aesthetic purposes more than usefulness purposes. A wide variety of modern designed and colorful themed distribution boards are available to buy in the market, there is something for everyone out there. Whatever may be your home decor setup, rest assured distribution boards will not ruin the decorum, instead, they may complement your lifestyle choices.

The INSTALLATION process is also another factor to consider when buying distribution boards. In the earlier days, distribution boards used to be heavy and certainly not a user-friendly solution. But today due to technological advancements distribution boards are made of high-quality yet light quality materials like CRCA Steel Sheet(INDIAN STANDARD “IS” Complaint) along with a rust-preventing phosphate coat with a sturdy frame which not only helps in easy installation but also provides strong structural integrity. Also, distribution boards are so modular and flexible now that the orientation of the mount can now be customized for either a flush or surface type thereby providing great convenience to the customers.

Availability Online

Only the best of the best brands are available to buy at ampkart.com.

From The House of Siemens, Germany’s leading heavy-duty mechanical engineering company to Schneider to India’s own Larsen & Turbo and Legrand. All these brands are available at ampkart.com. Customers can buy any of the brands mentioned above with blind trust for these are no ordinary brands,  they are among the best available in the industry of distribution boards, thereby providing the required trust and faith.

About Ampkart.Com

They are a unique company, with a history of over 60 years in trading of electrical goods including but not limited to distribution boards. They have stood the test of time while enduring difficult situations and finally emerged victorious. A dedicated wholesale unit is in place too, for clients who need to buy in bulk. For customer’s convenience, ampkart.com only stocks the best available brands in the market and ships the electrical goods to its customers all over India for free. All of this is thought of providing the customer a better experience in online buying of all electrical goods. Online E-commerce selling business with a human touch.

A distribution board (DB) is the prime electrical supply system used in any residential or commercial complex. The main supply chain is directly connected to the distribution board and then gets distributed in the secondary circuits, such as plugs or lights, via breakers. A distribution board helps maintain the optimal performance of every appliance by sullying a proper power supply distribution keeping the circuits and devices safe. 

Distribution boards are not just a singular entity but an overall system in itself decked with neutral links, earth leakage unit as well as interconnecting wires solely used for efficient electrical distribution in the premise. 

The Standard Distribution Boards Comes in Two Categories:

Single Door Distribution Board: These are used for facile, rather simpler applications. A single door distribution board is available in three different configurations- 4 way, 8 way and 16 way. 

Double Door Distribution Boards: It is installed in case of heavy duty operations (commercial uses), or when the number of connections and applications is much higher.

USES OF DISTRIBUTION BOARDS:

1.FOR SAFETY PURPOSE:

One prominent part of all distribution boards are fuses. It is an important of the whole system because it allows the overcurrent to pass through the overall internal circuit. When encountered with overcurrent, the fuse will automatically shut down the primary supply cutting off further supply to your appliances and preventing any sort of electric hazard at the place of installation.

2.AESTHETICS:

 These days immense importance and efforts are put into designing and styling distribution boards to go with the premise’s character. It no longer remains an electric system with bourgeois exterior but comes with customization to compliment your overall decor and thus, serves aesthetic purposes as well.

3.THEATRE LIGHTING:

In theatres, a specialty panel called dimmer rack is used to project stage lighting. A control cable along with a power feed is operated from a lighting desk that carries information to the dimmer and back. This arrangement serves simpler alterations and easier operations and this makes it respond quickly to successive commands during a show. 

4.USED AS CONSUMER UNIT:

A distribution board that is specifically designed for domestic usage is also known as Consumer Unit. Typically, they are housed in sheet metal shields with circuit breakers connected in a columnar alignment. This arrangement is set in a way that it can be operated from the front comfortably. The arrangement is often halted with panel boards to keep electrical parts within it separated so as to prevent it from any overlapping and hence, any electrical danger. 

5.ACTS AS EMPTY CLOSURES:

Distribution boards are deemed to be very versatile electrical system. As a customer, you can ask for distribution boards that will serve as empty closures. Empty closures are nothing but ready to use wired standard units or an electric manufacturing designed specifically while keeping in mind the user’s electrical requirement. The keynote about such an ordered series opens opportunity for using it in separate parts of the complex, supposing it the case that they are all controlled by a switch disconnector.

6.IN COMMERCIAL BUILDINGS:

 An electrical distribution board is a vital part of the whole process of electrical fixings and installation in a commercial building. It helps transmit power supply throughout the complex in the most efficient way possible. The power supply is to be controlled forasmuch as to prevent any overload in case of overcurrent. 

7.ACTS AS A CURRENT SENSING DEVICE:

An important component of distribution boards is Residual Current Circuit Breaker (RCCB). It is an additional safety instrument that stabilizes the electrical current flowing through primary and secondary circuits. Conceding that, RCCB is actually a current sensing device and that component only renders the distribution board its current sensing nature. RCCB ensures that in case of overload, the circuit must trip at full tilt safeguarding you from electric shocks, electrocution and fire.

OUR BEST SELLING PRODUCTS

L&T SWITCH GEAR BUY NOW

L&T SWITCH GEAR SINGLE DOOR: BUY NOW

L&T SWITCH GEAR DOUBLE DOOR: BUY NOW

IMAGE COURTESY

IMAGE COURTESY