L&T TPN  Main Switch Disconnector Fuse (SDF) without Enclosure or Open Execution:

• • Range 32A to 800A, 415V, AC 23A

• Conforms to IEC 60947-3, IS/IEC 60947-3
• Terminal Shrouds on both sides and Phase Barriers included
• Telescopic shaft for depth adjustment
• TPN SDF has isolable neutral
• 4P SDF has Switched Neutral Pole and is 100% rated
• Door interlock & padlock facility

L&T TPN Main Switch Disconnector Fuse (SDF) with SS Enclosure:

• Range 32A to 800A, 415V, AC 23A
• Spacious Sheet Steel Enclosure
• Separate cable gland box not required
• Terminal Shrouds on both sides and Phase Barriers included
• Benefits of 3 in 1:
  • Cable Gland Box Top
  • SDF in Enclosure
  • Cable Gland Box Bottom
• Conforms to IEC 60947-3, IS/IEC 60947-3
• Suitable for Cylindrical/DIN fuse-link
• Door interlock & padlock facility
• The SDF units in SS enclosure version can be replaced with FN TPN SDF open execution units. Please refer below for replacement of 250A unit
• For replacement of FN 250 SDF unit in sheet steel enclosure version (Cat. No. SK90489OOOO & SK95681OOOO), order Cat. No. ST97895OOOO

• Muller ACCLs are suitable for Domestic, Residential and Commercial Applications.
• Wall Mounting Type in Powder Coated Mild Steel Enclosure.
• Powered by Type Tested Contactor confirming to IEC-60947-4-1.
• Controlled by Muller I.C. Logic circuit with Main ON, DG On, Overload Trip Indicator & provision of Earthling.

• Conforms to IEC 60974-2
• Fixed thermal magnetic release throughout the range
• Compact dimensions and a Common range of accessories
• Up to 50? no derating and Line-load reversibility
• Suitable for DC application till 250V DC
• Operation voltage till 550V AC, insulation voltage of 690V AC, and impulse voltage of 6KV

Features and Details:

• Conforms to IEC 60947-3 | IS/IEC 60947-3
• Range 63A to 2000A , 415V , AC 23A , 4 Pole
• The enclosure version does not require a separate cable gland box
• Terminal Shrouds, Source Separator and Phase Barriers included
• Staggered Terminals make cable termination easy
• Suitable for horizontal as well as vertical mounting

Features and Details:

• Phase Barriers are provided with all DY125U & DY250U1 MCCBs
• Thermal Magnetic Release
• 415 V AC
• ON -TRIP-OFF indication
• High Electrical and Mechanical Life
• Suitable for Isolation
• No Load-Line Bias

Features and Details:

Schneider Electric Acti9 MCB 10ka ‘C’

• Breaking capacity as per IEC 60898 | Icn = 10kA
• Positive Contact Indication for assurance of disconnection
• Degree of pollution: 3 (suitable for the industrial environment)
• Operating Temperature: -30 to 70C
• Terminal connections: Flexible cables up to 35 sq.mm; Rigid cables up to 50 sq.mm

Schneider Electric Acti9 6-63A MCB 10kA ‘C’ xC60

• Breaking Capacity as per IEC 60898 and IS/IEC 60898-1, Icn = 10kA
• Can be used for DC application upto 60V per pole
• Higher system performance with optimized cost: Cascading
• Increased System Continuity: Discrimination
• Higher Installation Life: Energy Limitation Class 3, Fast Closure Mechanism
• Ease, Speed and Flexibility of installation – Biconnect, Line-Load Reversible
• Field-fittable auxiliaries for advance protection and monitoring
• Positive Contact Indication for assurance of disconnection

Features and Details:

• Complies to IEC/EN 60947-3
• Switching duty: AC-22
• Impulse voltage: 6kV
• DC application: 48V (110V with 2 poles in series)
• Short circuit withstand 20 In for 1 second
• Up to 80A Bi connect terminals & 100A to 125A with mono connect terminals

Features and Details:

• DPX3 MCCB with Thermal Magnetic Protection Unit: O/L & S/C protection
• Range: 16A ? 1250A, Ics=100%Icu, Four Optimum Frames
• Thermal Adjustable ? 0.8 to 1In, Magnetic Adjustable ? 5 to 10In ( Fixed at 10In for DPX3 160)
• Option for add on module for Earth Leakage Protection
• Adjustable sensitivity: 0.03 – 0.3 – 1 – 3 A
• Adjustable tripping: 0 – 0.3 – 1 – 3s
• Suitable for Isolation