Electron – Ampkart https://www.ampkart.com Buy Electrical Products Online Easily Thu, 18 Apr 2024 12:25:11 +0000 en-US hourly 1 https://www.ampkart.com/wp-content/uploads/2020/11/ampcart-icon-64x64.png Electron – Ampkart https://www.ampkart.com 32 32 Electron AC Starter Switches 1 Phase Digital OLP3+ https://www.ampkart.com/electron-ac-starter-1-phase-olp3/ https://www.ampkart.com/electron-ac-starter-1-phase-olp3/#respond Thu, 27 May 2021 04:12:02 +0000 https://www.ampkart.com/import-placeholder/
  • Electron 21-30A 1 Phase OLP3+ Air Conditioner starters is an advanced microprocessor-controlled motor starter designed to ensure your air-conditioner's safety and long life using  VOLTCHECK, AMPCHECK, and TIME CHECK.
  • VOLT CHECK - It monitors the line voltage and trips if safety limits of (160-270V) are crossed. The reason for failure and unsafe voltage amount will be displayed if it trips.
  • AMP CHECK - Continuous monitoring of the current drawn by the AC is a key function of the OLP 3+. If the current exceeds a pre-set limit, the output is disconnected. This protection mechanism safeguards the compressor against potential damage. Higher the overload, the quicker the tripping. The overload amount will be displayed if it trips.
  • TIME CHECK - In the event of a trip, it keeps the output open for a duration of 3 minutes starting from the last compressor operation, after which it automatically restarts the AC system. This delay is crucial for ensuring the safety of the compressor. Relevant trip details and Time remaining will be displayed in the event of a trip.
  • It is applicable in networks of 240V AC current.
  • Buy 21A - For 1-2 Ton, 25A - For 2-2.5 Tons, 27A - For 2.5-3 Tons, 30A - For 3 Tons AC Load.
    • ]]>     Electron Air Conditioner Starter 1 Phase OLP3+ Description
    • Today, air-conditioners are usually the highest energy-consuming appliance in a home, and also one of the most expensive. The all-new OLP 3+ is an advanced microprocessor-controlled motor starter designed to ensure the safety and long life of your air-conditioner using the time-tested combination of VOLTCHECK, AMPCHECK, and TIME CHECK. The vivid 3-digit display shows all operational parameters such as voltage, current, the reason for the trip, and time remaining till reset, for user interest and awareness of their AC’s consumption characteristics. Available in 11A, 16A, 21A, 25A, 27A and 30A configurations.
    Rated Voltage 240V (P-N), 50 Hz, 1 phase
    Rated Current(AC1) Up to 30A
    Under/over-voltage protection 160-270V
    Operating voltage range 90-320 V
    Electrical Endurance(Operations) 100,000
    Enclosure Materials Polycarbonate (Flame-retardant)
    Mounting Type 4-module box
    Mounting Center 120 mm
    Terminal Capacity 10 mm2
    Dimensions in mm(W X H X D) 146 X 88 X 44
    Protection Class IP20
    Ambient Temperature -10°C to 65°C
    Display Parameters Line Voltage, Current, Fault Indication, Time before the restart
    Protection Features VOLTCHECK, AMPCHECK, TIMECHECK

    VOLTCHECK :

    • OLP 3+ monitors the line voltage and trips if safe Rated Current limits (160-270V) are breached. If tripped, the reason (Hi/Lo) and value of unsafe voltage are shown.

    AMPCHECK :

    • Current drawn by the AC is monitored continuously, and the output is disconnected if this exceeds a pre-set limit. This protects against damage due to rotor locking or excessively long start-up time. Tripping follows an inverse time-current characteristic – the higher the overload, the faster the tripping response. After tripping, the overload current is shown on the display.

    TIMECHECK :

    • On tripping, OLP 3+ holds the output open for a duration of 3 minutes from the time of last compressor operation and then restarts the AC automatically. This is an important safety measure for the compressor. When TIME CHECK is active, the display indicates the number of minutes left for Protection Features VOLTCHECK, AMP- AC to restart, along with trip information.
    ]]>     https://www.ampkart.com/electron-ac-starter-1-phase-olp3/feed/ 0     Electron Automatic Changeover Switch https://www.ampkart.com/electron-automatic-changeover/ https://www.ampkart.com/electron-automatic-changeover/#comments Mon, 15 Mar 2021 07:51:53 +0000 https://www.ampkart.com/?post_type=product&p=13268
  • Electron ACCL available in 1 Phase and 3 Phase configurations up to 125A capacity with Customised Generator Limit (DG) option.
  • Automatic Changeover cum Current Limiter (ACCL) is a fully automatic, high-precision system installed in apartments, residential complexes, and commercial buildings.
  • No separate wiring is required.
  • Display key parameters such as current, voltage, pre-trip, and trip indication.
  • Best-in-class design and aesthetics with fire-retardant polycarbonate body for increased safety.
  • DIN channel mountable enclosures save space and make installation hassle-free.
  • Assured availability of allotted current - no less, no more. Ensures equitable rationing of generator power.
  • Microcontroller-based design for superior performance, replacing outdated manual systems at no extra cost.
  • Simple operation with a clear indication of states — set it and forget it!
    • ]]>     Automatic Changeover-cum-Current Limiter(ACCL):

    ACCL is a fully automatic, high-precision system installed in apartments, residential complexes, and commercial buildings. It has the following functions:

    • The ACCL allows unrestricted power on Mains. If both EB and DG supplies are available, EB is given preference
    • When EB fails and the standby Generator is ON it transfers the load to DG and begins monitoring the load. While on DG, if the load current exceeds a pre-set limit, the output trips. Other consumers who are within limits continue enjoying uninterrupted DG power. After 8/10/12 seconds, the load is reconnected and monitored again. If the current drawn has been reduced by switching off unneeded appliances, supply continues, else, it trips again.
    • When EB gets restored, the ACCL automatically disconnects the load from DG and transfers it to EB.

    Features and Benefits:

    • Microcontroller-based design for superior performance, replacing outdated manual systems at no extra cost.
    • No separate wiring is required.
    • Available in single-phase and 3-phase configurations, up to 125A capacity.
    • DG metering (Class 1.0) models with RS-485 connectivity are available.
    • Assured availability of allotted current – no less, no more. Ensures equitable rationing of generator power.
    • DIN channel mountable enclosures save space and make installation hassle-free.
    • Display key parameters such as current, voltage, pre-trip, and trip indication.
    • Best-in-class design and aesthetics.
    • Fire-retardant polycarbonate body for increased safety.
    • Simple operation with a clear indication of states — set it and forget it!
    ]]>     https://www.ampkart.com/electron-automatic-changeover/feed/ 15